home *** CD-ROM | disk | FTP | other *** search
- Path: telepost.no!usenet
- From: jornilse@telepost.no (jorn o.nilsen)
- Newsgroups: comp.sys.amiga.graphics
- Subject: CyberVision
- Date: 4 Feb 1996 00:36:15 GMT
- Organization: TelePost Public Access
- Message-ID: <1238.6608T94T1632@telepost.no>
- NNTP-Posting-Host: oslo407.telepost.no
- X-Newsreader: THOR 2.2 (Amiga;TCP/IP)
-
- I'm now the proud owner of a CyberVision64 graphic card, but I'm having big
- problems with setting this up to the rest of my system.
-
- This i s the scenario; I have innstalled the card, the machine reports that
- there are 2 active card in the machine (the other is a GVP I/O card). I have
- innstalled the software that followed the card, i load CVMode, and i can see
- a lot of modes that i can modifie to suit my need.
-
- But the problem seems to be that I cannot select my modified monitor setting
- in the screenmode prefs editor. The only CV mode is 640x480x8, with 68 Hz
- vertical refresh and 35.7 Khz horizontal refresh. Isn't it right that I'm
- supposed to select the screenmode of my nedd from here or am I completely
- wrong?
-
-
-
- This is my setup; A4000 with 040 and buster.11, 8 mb fast
- cbm 1942 monitor (lousy, but the only I have)
- KickStart 39.106, WorkBench 40.42
- and of course, CyberVision64 with 4 mb ram
-
-
- I would like to set this up so I can have this resolutions;
-
- 800x600X24/16/8
- 640x512x24/16/8
-
-
-
-
-
-
-
-
- j°rn o.nilsen skreiv dette 04-Feb-96 01:24:22 <jornilse@telepost.no>
- <sb>
- Shell to DOS...Shell to Dos...Come in Dos...Oh no...
-
-